— ACTIVATED CARBON
Extruded Activated Carbon (EAC)
Coal-based and coconut shell EAC pellets evaluated for air, gas, odor-control and industrial adsorption systems.
— PRODUCT OVERVIEW
Extruded Activated Carbon for Gas-Phase Systems
Extruded activated carbon is formed into cylindrical pellets that support consistent bed packing and can help balance adsorption performance, pressure drop and mechanical handling in gas-phase systems. EAC is the correct abbreviation used throughout ARBONYX.
Pellet diameter alone does not define performance. Buyers should specify gas composition, contaminants, concentration, humidity, temperature, flow, bed dimensions and required adsorption testing.
— AVAILABLE PRODUCTS
Available Extruded Activated Carbon Products
Select a product form or treatment route below. Final grade selection should be based on the application, target contaminant, process conditions and required specification.
Coal-Based EAC
A broad-duty pellet option commonly evaluated for air, gas and industrial vapor treatment where pressure drop and bed strength matter.
Typical fit: odor control, process-gas purification and selected solvent or VOC duties after engineering review.
Coconut Shell EAC
A pelletized option considered where coconut-shell pore characteristics are relevant to the target gas-phase contaminant.
Typical fit: selected air and gas purification systems after contaminant, humidity and flow review.
— SELECTION GUIDE
How to Select the Right Grade
Start with the gas stream and equipment. Then compare raw material, pellet diameter, pressure-drop requirements, adsorption test, hardness and any impregnation or safety needs.
1. Application & target
Provide gas composition, target compounds, concentration, humidity, temperature and flow.
2. Product form
Define vessel, bed depth, allowable pressure drop and pellet-retention conditions.
3. Performance requirement
Choose coal-based or coconut shell material according to pore and duty requirements.
4. Required specification
Confirm pellet diameter, adsorption test, hardness, moisture, ash and documentation.
— TECHNICAL SPECIFICATIONS
Specification Framework
ARBONYX does not publish a single value as if it applied to every grade. The quotation and technical data must match the selected product, application and agreed test method.
| Parameter | Why buyers review it | How it is confirmed |
|---|---|---|
| Pellet diameter / length | Influences packing, flow and pressure drop | Confirmed for the selected grade and test method |
| Adsorption activity | Test must match the gas-phase duty | Confirmed for the selected grade and test method |
| Hardness / abrasion | Affects pellet integrity and dust generation | Confirmed for the selected grade and test method |
| Moisture | Relevant to delivered condition and adsorption | Confirmed for the selected grade and test method |
| Ash | Reviewed for residue and purity | Confirmed for the selected grade and test method |
| Bulk density | Used for bed loading and logistics | Confirmed for the selected grade and test method |
— APPLICATIONS
Where This Product Is Considered
EAC is primarily evaluated for gas-phase systems. The final grade depends on the contaminant and operating environment, including humidity and temperature.
Air Purification
Pellets may be evaluated for VOC, odor and general air-treatment duties.
Industrial Applications
Process-gas and industrial vapor duties require application-specific review.
Food & Beverage
Selected gas or process-air duties may require carefully reviewed grades.
— B2B SUPPLY
Ordering & Documentation
Packaging format, minimum order quantity, sample availability, lead time, labeling and private-label requirements are confirmed for the selected grade, quantity and destination market. Nothing is assumed before the commercial review.
For regulated or specification-sensitive uses, ask which COA, TDS, SDS, test reports or other documents are available for the exact product under discussion.
— RELATED PRODUCTS
Continue Your Product Comparison
Coal-Based Activated Carbon
Coconut Shell Activated Carbon
Granular Activated Carbon (GAC)
— FAQ
Frequently Asked Questions
What does EAC mean?
EAC means Extruded Activated Carbon. ARBONYX does not use ECA.
Why is activated carbon extruded into pellets?
The cylindrical form supports consistent bed packing and is often selected to balance gas flow, pressure drop and mechanical handling.
How do I choose pellet diameter?
Use gas flow, bed depth, allowable pressure drop, retention and contact-time requirements. Confirm the choice with system data.
Is EAC only coal-based?
No. Coal-based and coconut-shell-based options can be considered, depending on the target contaminant and grade availability.
What gas-stream data should I provide?
Provide the target compound, concentration, humidity, temperature, flow rate, bed dimensions and desired outlet level.
Are impregnated grades included?
Impregnation is application-specific. It should only be discussed after identifying the contaminant, chemistry, safety conditions and documentation needs.
Discuss Your Extruded Activated Carbon Requirements
Share your application, target, specification, quantity and delivery requirements for a focused reply.